BARIX Instreamer Manual do Utilizador descarregar pdf (Página 13)

Technical Documentation “Instreamer “ - V4.03 - 24th October 2013

Element Description CGI command SERIAL, TCP or UDP command

Not all commands are changeable on the fly, for example

changing the TCP ports will have no affect. As a general rule

if there is already a separate command to perform the

change, e.g Volume control then QUIETCONFIG will not

work.

If you are not sure please ask Barix for advice.

STRING2SERIAL Sends a string to the serial port. Neither a zero terminator nor

a CR nor a LF will be added to the end of the string. Zero

character and ampersand (&) are impossible to send this way.

S=... 0x53 0x3D...0x00 (S=... )

SENDTCPSTRING Sends the attached string through the TCP interface. The

answer is the string itself.

T=… 0x53 0x3D (T=… )

VOLUME00

VOLUME01

---

VOLUME20

Set the volume for the headset

Set minimal volume level (volume off).

Set volume level 1.

Set maximal volume level.

Corresponding values sent to the codec for 0..20:

0, 76, 80, 84, 88, 92, 96, 99, 102, 106, 108, 110, 112, 114,

116, 118, 120, 124, 125, 126, 127

One step is showed as 5%. The level 0 equals the 0%.

v=0

v=1

---

v=20

0x76 0x3D 0x30 0x00 (v=0 )

0x76 0x3D 0x31 0x00 (v=1 )

---

0x76 0x3D 0x32 0x30 0x00 (v=20 )

13 Software Application Interface Software Application Interface 13

1 2 ... 8 9 10 11 12 13 14 15 16 17 18 ... 38 39

Sem comentários

BARIX Instreamer Manual do Utilizador Página 13