BARIX Instreamer Manual do Utilizador descarregar pdf (Página 19)

Barix Instreamer User Manual Version 01.03

Page 17

10 Advanced user section

10.1 Network configuration using

supplied serial cable

STEP 1

Open a Terminal program.

STEP 2

Go to the settings menu and adjust the following settings:

Baud rate 9600 bit/sec, 8 Data Bits, no Parity and 1 Stop

Bit.

STEP 3

Unplug the power supply of the Barix Instreamer.

STEP 4

Connect the supplied serial cable to your PC’s COM port

and to the serial port of the Barix Instreamer.

STEP 5

Keep the Reset button pushed and plug in the power

supply. Release the Reset button as soon as you see the

following screen:

STEP 6

Hit <s> to skip network discovery if not connected to a

network and the following screen appears:

STEP 7

Hit <s> to get to the Barix Instreamer setup.

STEP 8

Hit <enter> to enter the Barix Instreamer setup mode.

STEP 9

Type in <0> and hit <enter> to enter the Network

configuration. Enter all requested values:

STEP 10

Type in <9> and hit <enter> to save the Network

configuration.

1 2 ... 14 15 16 17 18 19 20 21 22 23

Sem comentários

BARIX Instreamer Manual do Utilizador Página 19