BARIX Instreamer Manual do Utilizador descarregar pdf (Página 24)

User Manual “Instreamer“ - V4.03 - 24th October 2013

For each function you want to disable add the value

from the table below:

• “0.0.1.0” to disable AutoIP

• “0.0.2.0” to disable DHCP

• “0.0.4.0” to disable BOOTP

• “0.0.8.0” to disable IPzator

Examples:

• “0.0.3.0” disables AutoIP and DHCP

• “0.0.11.0” disables all except BOOTP

Attention: “0.0.15.0” disables all discovery functions

which locks you out unless you reset the device to

factory defaults by pressing the reset button for

about 10 seconds.

Netmask

Enter the 4 values of the desired Netmask e.g.:

• “0.0.0.0” for a default Netmask depending on the

IP Address used

• “255.255.255.0” for a C class network

Note: Try first the Netmask your PC is set to or ask

your Network Administrator.

Gateway IP Address

A correct setting of the Gateway IP address is

needed to stream to the Internet or to destinations

outside your local network (LAN).

Enter the 4 values of the desired Gateway IP

address e.g.:

• "0.0.0.0" for no Gateway or automatic discovery

• "192.168.0.1" for a Gateway in a LAN

Note: If you have set the devices IP address to

automatic discovery and your server or router has

24 /63 BARIX AG | 28. Jan. 2014 | Device Configuration

1 2 ... 19 20 21 22 23 24 25 26 27 28 29 ... 62 63

Sem comentários

BARIX Instreamer Manual do Utilizador Página 24