BARIX Instreamer Manual do Utilizador descarregar pdf (Página 46)

User Manual “Instreamer“ - V4.03 - 24th October 2013

TCP Connection address

If 0.0.0.0, a listening command port is opened.

Otherwise a TCP connection is actively attempted at

the given address and port. If the connection fails, it

is reattempted every minute. Default:0.0.0.0

SNMP SETTINGS

SNMP traps are configured in this parameter group.

The traps are sent to the “Trap Target IP Address”.

The Standard Cold Start trap is sent on re-boot.

Two additional specific traps for left and right Audio

levels can be configure. The traps are triggered

according to specific audio values as described

below. Note that audio levels can only be monitored

for analogue audio inputs.

Trap Target IP Address

Enter the IP address of the SNMP trap destination.

Low Audio Level

Define the low audio level for the trap which will be

generated as soon as the audio level goes below

this value (and the “Silence timeout” has expired).

High Audio Level

Define the high audio level for the trap which will be

generated as soon as the audio level goes above

this value.

Trap Repeat

Define the SNMP trap repeat interval. The trap is

repeated if the audio level values are still out of

range.

Silence Timeout

Define the time interval for sending a trap after the

low audio level is detected.

46 /63 BARIX AG | 28. Jan. 2014 | Device Configuration

1 2 ... 41 42 43 44 45 46 47 48 49 50 51 ... 62 63

Sem comentários

BARIX Instreamer Manual do Utilizador Página 46