BARIX Instreamer Manual do Utilizador descarregar pdf (Página 34)

User Manual “Instreamer“ - V4.03 - 24th October 2013

Post Trigger Play

Post Trigger Play is only used when Streaming

mode is set to send on Level.

Post Trigger Play can be adjusted to prevent a cut

off when audio should be sent longer than detected.

It defines the amount of time that the device will

continue streaming after the actual trigger has been

cleared.

Contact Closure

Contact Closure is only used when Streaming mode

is set to send on I/O.

Defines the contact closure input (GPI) that controls

the device streaming in

"send on I/O"

. Select the

polarity in

"Input Polarity"

Input Polarity

Input Polarity is only used when Streaming mode is

set to send on I/O.

Selects the contact closure event that triggers the

streaming in

"send on I/O"

mode.

"active closed"

causes the device to stream when the selected

contact is closed.

"active open"

causes the device

to stream when the selected contact is open.

Used to select whether the device streams when the

selected control GPI is in the open or closed state.

Send Contact Closure Information

The current state of the device's GPI is inserted into

RTP and Shoutcast streams. (This also applies to

the BRTP connection type which uses an RTP

stream). This feature is compatible with Streaming

Client v02.10 and later.

34 /63 BARIX AG | 28. Jan. 2014 | Device Configuration

1 2 ... 29 30 31 32 33 34 35 36 37 38 39 ... 62 63

Sem comentários

BARIX Instreamer Manual do Utilizador Página 34